It is used to determine the hot tensile strengh of the resin sand
and the coating sand. It can be used to determine the tensile
strengh in the normal temperature.
The hot tensile strength is one of the main detection methods for
judging the film-forming properties of resin sand and coated sand.
It is equipped with a microcomputer intelligent control stepper
motor loading system, intelligent automatic temperature control
system and intelligent measurement system. It adopts liquid crystal
display, high-precision load cell and miniature Chinese printer.
The sample is placed on the host sample mold, and automatically
heated (232 ° C, about 120 s), automatically loaded to display the
force process curve, measured its tensile strength, display
measurement results, storage and print reports.
main specifications
- Max testing force 5000N
- measuing range 0-12MPa, ±1%
- loading speed 3.0-10mm/min.
- controlling temperature range 0-232℃, ±1℃
- heating time 120s
- rated power 1.2KW
- power source AC220V/50Hz
Max testing force | 5000N |
compression strengh | 0-12MPa, ±1% |
deformation range | 0-5mm |
loading speed | 3.0-10mm/min. |
controlling temperature range | 0-232℃, ±1℃ |
heating rate | automatic constant speed |
the dia. of the furnace | ɸ50mm*50mm |
furnace power | 1.2KW |
power source | AC220V/50Hz, 3KW |
Instrument features
1. It adopts special stepping motor, automatic temperature control
system,
loading system controlled by micro-computer and intelligent
measuring system.
2. It is equipped with color LCD, force sensor and micro printer.
3. It can finish timing heating automaticly(232 ℃, about 120 s),
loading automaticly, displaying force process curve
and the measuring result, data saving and printing automaticly